The EVSE ID defines the unique identifier, a numeric and letter code of a QR code, a charging point associated with roaming loads. Depending on the country, the EVSE ID varies and may, for example, look like AT * ION * E203953 or DE * BOX * EAC0004. Scanning the QR code allows easy and instant access to this exact charging point. It is generally advisable to assign an EVSE ID, as this also significantly simplifies communication with end customers and functions as a clear identification.
Please note that there are different presets for the issuing of operator IDs depending on the country. In Germany, the award is issued by the Federal Association of Energy and Water Management, in Austria by the Austrian Mobile Power and other countries may select other institutions as the issuing agency. Please read the country-specific information in advance.
Configuration of the EVSE ID in be.ENERGISED
To configure the EVSE ID of a loading point in be.ENERGISED, open the station data sheet of the charging station and select Edit/Charging connection/Connector from the menu.
Fig. 1: Choosing a loading point from the station data sheet
In the window that opens, you must now enter the EVSE ID. The EVSE ID should be entered separately and divided among the fields of country code, operator and the loading point number. Please ensure that the loading point number must be entered without the letter “E” at the start. This will be added by the program itself.
Fig. 2: Adjusting the loading point settings
|The changes will be accepted immediately after saving.
Double allocation of EVSE ID numbers is not permitted.