In order to make a charging station accessible to roaming systems and third parties, you must first activate a roaming interface (for example, the be.ENERGISED COMMUNITY) in the system. Then you will find a new Roaming tab on the charging station data sheet, where you can configure the configurations for the roaming connection.
The Configuration of roaming services allows you to specify the general properties of the charging station. Please specify the functionalities of your charging station. This data is also used for display in station finders. If you are not sure which values your station supports, please contact the manufacturer of the charging station.
Furthermore, in this area you will find a sub-tab for each roaming provider, which allows advanced settings for the respective provider. In each sub-configuration, you also see a check about whether you have made all the configuration correctly and without errors.
To activate the be.ENERGISED COMMUNITY on a charging station, follow the path Roaming/be.ENERGISED COMMUNITY and select the “Enabled in this roaming profile” check box.
If necessary, you have to set the required tariff on each charging port and supplement the marketing data of the charging station in order to allow a representation of the station on roaming portals.
|All settings are saved in real-time in the system and do not need to be saved separately. Please note, however, that it may take up to several days for all portals to synchronize the POI data of the charging station.|